This kit enables you to run your Hot Head torch off a bulk cylinder of propane (LPG) gas. Although Mapp gas is the preferred gas for Hot Heads the costs soon start adding up as you get more hooked on beadmaking. Propane gas available from many garages, welding supplies, camp sites and garden centres is a close alternative to Mapp gas for your Hot Head although burning slightly lower in temperature this is not a major problem. Savings are huge by using propane as a normal 13 kilo cylinder will cost between £12 - £18.00 and will give 100 hours use. This kit contains a 4 bar propane regulator, propane flashback arrestor, 5 mtr of propane hosing and the torch connector.All the kit is joined together and ready to use once you screw the cylinder on one end and the torch on the other.
This kit enables you to run your Hot Head torch off a bulk cylinder of propane (LPG) gas. Although Mapp gas is the preferred gas for Hot Heads the costs soon start adding up as you get more hooked on beadmaking. Propane gas available from many garages, welding supplies, camp sites and garden centres is a close alternative to Mapp gas for your Hot Head although burning slightly lower in temperature this is not a major problem. Savings are huge by using propane as a normal 13 kilo cylinder will cost between £12 - £18.00 and will give 100 hours use. This kit contains a 4 bar propane regulator, propane flashback arrestor, 5 mtr of propane hosing , quick release connector and the torch connector.The quick release connector enables you to work with the cylinder outside the workroom with the hosing passing through an open window or door, at the end of the day instead of disconnecting the regulator simply quick release the connector to split the hose in two.You can then store the hose in the workroom and leave the cylinder outside. All the kit is joined together and ready to use once you screw the cylinder on one end and the torch on the other.
A single stage plugged propane regulator. This regulator is rated for 0-4 bar pressure so will handle all your beadmaking needs and is better qaulity than your imported regulators. British made this regulator conforms to BS EN ISO 2503
This i a single stage two gauge oxygen regulator. British made this regulator is designed to work 0-10 bar pressure and confirms to BS EN ISO 2503.
Propane Flashback Arrestor
Oxygen hosing for use with bulk gas clyinders. 5 meters long and with bolt attachments to the regulator or flashback this is very sturdy hosing.
This allows you to run two or more torches from a sinle propane cylinder. Fitted in line between the regulator and torch, it splits the propane hose to run off to a second torch. (you will need to purchase a second hose to connect to the torch)
This allows you to run two or more torches from a sinle oxygen cylinder. Fitted in line between the regulator and torch, it splits the oxygen hose to run off to a second torch. (you will need to purchase a second hose to connect to the torch)